LV Xiaolian, HU Zhichao, LIU Minji, YU Xiangtao, ZHANG Huijuan. Design and experiment of the 2BQHM-2 peanut mulching film and punching planter[J]. Journal of South China Agricultural University, 2015, 36(1): 96-100. DOI: 10.7671/j.issn.1001-411X.2015.01.018
    Citation: LV Xiaolian, HU Zhichao, LIU Minji, YU Xiangtao, ZHANG Huijuan. Design and experiment of the 2BQHM-2 peanut mulching film and punching planter[J]. Journal of South China Agricultural University, 2015, 36(1): 96-100. DOI: 10.7671/j.issn.1001-411X.2015.01.018

    Design and experiment of the 2BQHM-2 peanut mulching film and punching planter

    More Information
    • Received Date: November 24, 2013
    • Available Online: May 17, 2023
    • Objective 

      To preferably accomplish the operation process of punching hole and planting.

      Method 

      The 2BQHM-2 air-suction peanut mulching film and punching planter was designed and manufactured for technical issues and requirements of peanut mulching film and punching planter. Based on theoretical analysis of the working parameters of the key parts, parts' structural optimal design of the planter components were completed with UGNX. With the virtual prototype technology, the machine was virtual assembled, and the cavitations' process of motion simulation was analyzed. The rationality and usability of machine components were tested.

      Result and conclusion 

      In the peanut growing typical region, the planter field trial showed that overall performance was relatively stable, with each component operated smoothly, and the operating indicators could meet the technical requirements better. Test results of the virtual simulation were basically consistent with the operational effects of the planter. The study has provides a theoretical basis and technical reference for further optimization design of the mulching film and punching planter.

    • [1]
      尚书旗, 王方艳, 刘曙光, 等.花生收获机械的研究现状与发展趋势[J].农业工程学报, 2004, 20(1):20-25. doi: 10.3321/j.issn:1002-6819.2004.01.005
      [2]
      张智猛, 胡文广, 许婷婷, 等.中国花生生产的发展与优势分析[J].花生学报, 2005, 34(3):6-10. doi: 10.3969/j.issn.1002-4093.2005.03.002
      [3]
      吕小莲, 刘敏基, 王海鸥, 等.花生膜上播种技术及其设备研发进展[J].中国农机化, 2012(1):89-92. http://d.old.wanfangdata.com.cn/Periodical/zgnjh201201024
      [4]
      卢勇涛, 陈学庚, 李亚雄.鸭嘴滚筒式气吸精量穴播器的设计与试验[J].中国农机化, 2012(1):104-106. doi: 10.3969/j.issn.1006-7205.2012.01.028
      [5]
      曹文, 丁俊华, 李在臣.精密穴播轮的研究与设计[J].农业装备与车辆工程, 2009, 211(2):21-25. doi: 10.3969/j.issn.1673-3142.2009.02.007
      [6]
      杜瑞成, 杨善东, 郭志东, 等.三种覆膜穴播成穴器方案设计与理论分析[J].山东理工大学学报:自然科学版, 2003, 17(2):15-18. http://d.old.wanfangdata.com.cn/Periodical/sdgcxyxb200302005
      [7]
      王吉奎, 坎杂, 吴杰, 等.夹持自锁式棉花精量穴播器的设计与试验[J].农业机械学报, 2006, 37(5):54-56. doi: 10.3969/j.issn.1000-1298.2006.05.015
      [8]
      杨善东, 杜瑞成, 郭志东, 等.联合作业穴播机的设计[J].农机化研究, 2007(11):118-119. doi: 10.3969/j.issn.1003-188X.2007.11.034
      [9]
      中国农业机械化科学研究院.农业机械设计手册[M].北京:机械工业出版社, 1990.
      [10]
      李宝筏.农业机械学[M].北京:中国农业出版社, 2008.
      [11]
      马旭, 马成林, 张守勤.地膜覆盖播种机成穴器的研究[J].农业机械学报, 1989(4):20-27. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK000002358549
      [12]
      陈学庚, 王敏.气吸鸭嘴滚筒式精密穴播器关键因素的研究[J].农机化研究, 2011(3):130-137. doi: 10.3969/j.issn.1003-188X.2011.03.033
      [13]
      夏俊芳, 许绮川, 吴一鸣, 等.旱作多功能精密穴播轮成穴机理的研究[J].农业工程学报, 2001, 17(5):11-14. doi: 10.3321/j.issn:1002-6819.2001.05.003
      [14]
      刘文忠, 赵满全, 王文明, 等.气吸式排种装置排种性能理论分析与试验[J].农业工程学报, 2010, 26(9):133-138. doi: 10.3969/j.issn.1002-6819.2010.09.022
      [15]
      刘彩玲, 宋建农, 王清旭, 等.气吸辊式水稻精量直播排种器的设计与试验研究[J].中国农业大学学报, 2012, 17(2):134-138. http://d.old.wanfangdata.com.cn/Periodical/zgnydxxb201202023
      [16]
      NY/T 987-2006. 铺膜穴播机作业质量[S]. 北京: 中华人民共和国农业部, 2006.

    Catalog

      Article views (1773) PDF downloads (1379) Cited by()

      /

      DownLoad:  Full-Size Img  PowerPoint
      Return
      Return