高级检索
    吕小莲, 胡志超, 刘敏基, 于向涛, 张会娟. 2BQHM-2型花生覆膜穴播机的设计与试验[J]. 华南农业大学学报, 2015, 36(1): 96-100. DOI: 10.7671/j.issn.1001-411X.2015.01.018
    引用本文: 吕小莲, 胡志超, 刘敏基, 于向涛, 张会娟. 2BQHM-2型花生覆膜穴播机的设计与试验[J]. 华南农业大学学报, 2015, 36(1): 96-100. DOI: 10.7671/j.issn.1001-411X.2015.01.018
    shu
    LV Xiaolian, HU Zhichao, LIU Minji, YU Xiangtao, ZHANG Huijuan. Design and experiment of the 2BQHM-2 peanut mulching film and punching planter[J]. Journal of South China Agricultural University, 2015, 36(1): 96-100. DOI: 10.7671/j.issn.1001-411X.2015.01.018
    Citation: LV Xiaolian, HU Zhichao, LIU Minji, YU Xiangtao, ZHANG Huijuan. Design and experiment of the 2BQHM-2 peanut mulching film and punching planter[J]. Journal of South China Agricultural University, 2015, 36(1): 96-100. DOI: 10.7671/j.issn.1001-411X.2015.01.018
    shu

    2BQHM-2型花生覆膜穴播机的设计与试验

    Design and experiment of the 2BQHM-2 peanut mulching film and punching planter

      摘要
    • 摘要:
      目的 较好地实现花生膜上成穴、播种作业.
      方法 针对花生覆膜穴播机存在的技术问题，进行2BQHM-2型气吸式花生覆膜穴播机优化设计与制造；对其关键工作部件结构及作业参数进行理论分析，然后利用UG设计分析软件完成组成部件的优化设计；通过虚拟样机技术对该机进行虚拟装配，并对成穴过程进行运动仿真分析，检验各组成部件设计的合理性及使用效果.
      结果和结论 典型地区花生垄作覆膜播种田间作业性能试验表明，该机工作性能较为稳定，各部件作业顺畅，各项作业指标均能较好地达到技术要求，其作业效果与虚拟仿真测试结果相符，研究结果为覆膜穴播机的进一步优化设计提供了理论依据及技术参考.

       

      Abstract:
      Objective To preferably accomplish the operation process of punching hole and planting.
      Method The 2BQHM-2 air-suction peanut mulching film and punching planter was designed and manufactured for technical issues and requirements of peanut mulching film and punching planter. Based on theoretical analysis of the working parameters of the key parts, parts' structural optimal design of the planter components were completed with UGNX. With the virtual prototype technology, the machine was virtual assembled, and the cavitations' process of motion simulation was analyzed. The rationality and usability of machine components were tested.
      Result and conclusion In the peanut growing typical region, the planter field trial showed that overall performance was relatively stable, with each component operated smoothly, and the operating indicators could meet the technical requirements better. Test results of the virtual simulation were basically consistent with the operational effects of the planter. The study has provides a theoretical basis and technical reference for further optimization design of the mulching film and punching planter.

       

      • HTML全文
      • 参考文献(16)
      • 相关文章
      • 施引文献
    • 资源附件(0)

    /

    返回文章
    返回