高级检索
    徐凤英,李德威,陈震. 用于精密冲裁工艺的平面六连杆冲压机机构优化设计[J]. 华南农业大学学报, 2000, (3): 91-93. DOI: 10.7671/j.issn.1001-411X.2000.03.025
    引用本文: 徐凤英,李德威,陈震. 用于精密冲裁工艺的平面六连杆冲压机机构优化设计[J]. 华南农业大学学报, 2000, (3): 91-93. DOI: 10.7671/j.issn.1001-411X.2000.03.025
    shu
    XU Feng-ying,LI De-wei,CHEN Zhen. Design of Plane Six-Bar Optimal Punchs Mechanism for Fine-Blanking Technology[J]. Journal of South China Agricultural University, 2000, (3): 91-93. DOI: 10.7671/j.issn.1001-411X.2000.03.025
    Citation: XU Feng-ying,LI De-wei,CHEN Zhen. Design of Plane Six-Bar Optimal Punchs Mechanism for Fine-Blanking Technology[J]. Journal of South China Agricultural University, 2000, (3): 91-93. DOI: 10.7671/j.issn.1001-411X.2000.03.025
    shu

    用于精密冲裁工艺的平面六连杆冲压机机构优化设计

    Design of Plane Six-Bar Optimal Punchs Mechanism for Fine-Blanking Technology

      摘要
    • 摘要: 根据精密冲裁工艺所需的条件，分析平面六连杆机构冲压机的运动规律，推导其运动约束方程，运用有约束条件下惩罚函数法，建立冲压机冲头轨迹的运动优化模型，实现运动构件尺寸的最优化设计。

       

      Abstract: Inthis paper, to meet the need of precise fine-blanking technology, the movement pattern ofthe plane six-bar puncher was analyzed. The restriction equations were inferred also. Byusing restriction punish function, the trail optimal mode of the puncher was built and theoptimal structural dimension design was determined.

       

      • HTML全文
      • 参考文献(0)
      • 相关文章
      • 施引文献
    • 资源附件(0)

    /

    返回文章
    返回