陈立,徐汉虹,赵善欢. 应用均匀设计获取复配农药最佳增效配方[J]. 华南农业大学学报, 2000, (3): 33-35. DOI: 10.7671/j.issn.1001-411X.2000.03.009
    引用本文: 陈立,徐汉虹,赵善欢. 应用均匀设计获取复配农药最佳增效配方[J]. 华南农业大学学报, 2000, (3): 33-35. DOI: 10.7671/j.issn.1001-411X.2000.03.009
    CHEN Li,XU Han-hong,ZHAO Shan-huan. Application of the Uniform Experimental Design to Obtain the Optimal Synergistic Mixture Ratio of Combined Pesticides[J]. Journal of South China Agricultural University, 2000, (3): 33-35. DOI: 10.7671/j.issn.1001-411X.2000.03.009
    Citation: CHEN Li,XU Han-hong,ZHAO Shan-huan. Application of the Uniform Experimental Design to Obtain the Optimal Synergistic Mixture Ratio of Combined Pesticides[J]. Journal of South China Agricultural University, 2000, (3): 33-35. DOI: 10.7671/j.issn.1001-411X.2000.03.009

    应用均匀设计获取复配农药最佳增效配方

    Application of the Uniform Experimental Design to Obtain the Optimal Synergistic Mixture Ratio of Combined Pesticides

    • 摘要: 借鉴共毒因子法评价农药复配联合作用的思想,将参与复配的单剂引起25%死亡率的剂量定为零水平,利用均匀设计安排实验研究氯氰菊酯和喹硫磷复配对斜纹夜蛾(Spodoptera litura)2龄幼虫的增效作用,得出杀虫剂使用量与斜纹夜蛾纪虫死亡率机率值之间的关系。从共毒系数(CTC)的计算公式推导出共毒系数与杀虫混剂中两单剂使用浓度N1、N2之间的数学模型:CTC=100/「(N1/a)+(N2/b)」,其中a、b分别为氯氰菊酯和喹硫磷的(LC50),进而确定最优化问题的目标函数:j=N1/a+N2/b,利用国际统计分析软件SAS的NLP过程求最大共毒系数和最优配方,所得结论与共毒系数法基本一致。

       

      Abstract: Bioassay was arranged with uniform experimental design method to study the combined synergism of cypermethrin and quinalphos on the 2nd instar larvae of common cutworm, Spodoptera litura . The relationship between the death probability of target insect and the dosages of the insecticides was described as a quadratic polynomial. The mathematical relationship between co toxicity coefficient (CTC) and the dosages of the insecticides (N 1, N 2 ) was deduced from the calculating formula of CTC, i.e. CTC=100/(N 1/a) (N 2/b), where a, b represent the medium lethal concentrations of cypermethrin and quinalphos, respectively. The formula: j=(N 1/a) (N 2/b) , was taken as the goal function of optimization problem. Finally, the maximum CTC and optimal mixture ratio of cypermethrin and quinolphos were obtained by using the program, NLP of SAS.

       

    /

    返回文章
    返回